Infinity_Mirror_-_Instruction_Manual_Casa_Di

📧 givenmille@gmail.com

Infinity Mirror – Instruction Manual

Basic Parameters

• • •

Supply Voltage: 5-16V

Remote Control Distance: Up to 10m/33ft WiFi Connection Distance (2.4Ghz): Up to 20m/66ft

1. Remote Control

Requirements: 3 x AAA Batteries

- Pry open the back of the remote control (the entire back piece of the remote control should come off). Insert the batteries into the remote control.

- Whenever a button on the remote control is pressed, a flash of red light should appear at the top of the remote control. This indicates that the remote control is working as expected and can control the mirror.

ON/OFF

Play/Pause Multicolor Effects

Single Color Selector

Timer

Move to the previous

multicolor effect

Brightness+

Brightness-

Increase Speed of Multicolor Effects

Sync to Music

Move to the next

multicolor effect

Increase Music

Sensitivity

Decrease Music

Sensitivity

Decrease Speed of

Multicolor Effects

：

Play/Pause Functionality

button on the remote starts the multicolor effects of the Infinity Mirror. These effects auto play in a sequence. You’ll be able to pause at a stationary multicolor effect by pressing the play/pause button once again.

Pressing the

play/pause

Speed +/- Button: Press the up/down keys of this button to adjust the speed of the multicolor effects. A total of 10 speed gears are available.

：

Selecting a Specific Multicolor Effect

You can iterate through specific multicolor effects by pressing Move

to the previous multicolor effect or Move to the next multicolor

effect on the remote control (see the labeled remote control manual). This will also continuously play the selected multicolor effect, unless

changed.

Color Wheel:

Tap/Slide anywhere on the color wheel to change to

a single solid color.

Timed Shutdown: Press the timer button to set the shutdown time

for your mirror to automatically turn off after the timer elapses. The

white light flashes 1/2/3/4/5 times respectively corresponding to a

timer of 1/2/3/4/5 hours to shut down, every time the button is

pressed.

Music Mode：

To sync your mirror to music, press the Sync to Music button (see labeled remote control manual) at the center of the remote control. Your Infinity Mirror will now react to the beat. You are now able to increase/decrease the sensitivity of your mirror to the music using the respective buttons on the remote.

Adjusting the Brightness of your Infinity Mirror：

Brightness +/- Button: Press the up/down keys of this button to adjust your Infinity Mirror’s brightness.

2. [Optional] Smart WiFi Application – Tuya Smart

Application Name: Tuya Smart (available on both iOS and Android) Requirement: 2.4GHz WiFi Connection Scan the QR Code to install the Tuya Smart application.

：

Connection Steps

1. Disconnect and reconnect the wire to your Infinity Mirror 2. The mirror should be blinking red, indicating that your mirror is now

in pairing mode

a. If It is not blinking red, long-press the Sync to Music button

on the remote control until your mirror is blinking red 3. Ensure that both Bluetooth and WiFi are enabled on the smart

device you are using to connect to your Infinity Mirror

4. Open the Tuya Smart App on your smart device

5. The application should automatically recognize the mirror and prompt you to connect to the mirror. You will be prompted to connect to your WiFi (You will need a 2.4GHz connection). Enter your WiFi’s password and the connection to your Infinity Mirror should be successful. If it does not automatically recognize the mirror, please see the alternative connection steps below.

Alternative Connection Steps

successful)： Method 1：Open the Tuya Smart App -> Select the “+” sign in the upper right corner of your screen -> Select “Add Device” -> This enters automatic device discovery -> Once discovered, select the device -> Add Successfully -> Complete.

(If automatic discovery was not

Method 2：Open the Tuya Smart App → Select the “+” sign in the

upper right corner of your screen -> Select “Add Device” -> Select

Light Source (Wi-Fi) -> Select your WiFi and enter your password ->

Add Successfully -> Complete.

If none of the above connection steps succeed：

1. Restart your WiFi connection

2. Disconnect and reconnect the wire to your Infinity Mirror 3. Ensure that both Bluetooth and WiFi are enabled on your smart device 4. Ensure that you are attempting to connect to a 2.4GHz WiFi network

Infinity Mirror Troubleshooting Steps

Are the colors of your mirror not corresponding correctly to the colors you’re selecting from the remote control?

1. Ensure that the mirror is plugged into your power outlet and

turned off

2. Long press the play/pause button (top-right most button on the

remote control) until the mirror turns on

3. Press the button on the remote control that iterates to the next multicolor effect (see labeled remote control manual) until you reach a multicolor effect sequence that goes in the order Red

-> Green -> Blue

4. Turn the mirror off using the remote control power button (top

leftmost button)

5. Turn the mirror back on (same top leftmost button) on the

remote

6. The mirror should now be working as expected, with the colors

of the mirror synced correctly to the remote control

Are you not able to control the mirror using the remote control?

Long-press the Sync to Music button on the remote control until the mirror starts to continuously blink red. The mirror has now been reset and can be controlled using the remote.